FUNCTIONS: |
CHARACTERISTIC: |
PARAMETERS: |
1. |
Map and check the curve of governor(idle , part and full load ). |
1. |
Quick view the characteristic curve of governor in dynamics.Test pump with the curve of governor. Save time, save effort, rapid, audio-visual,accurate.
It's a very good tool for specialist to test pump. |
Power |
5.5 /7.5/11/15/18.5/22/30KW |
2.? |
Checking of the advance device in dynamics. |
2. |
Computer (industrial computer work station, hand book, pc) measure and control. Standard computer and standard ports. CD-ROM drive, hard disk, Windows operating system. |
Electronical supply |
3phase,380V/50HZ (or on request) |
3. |
Measurement of each cylinder's delivery at any speed. |
3. |
High definition, LCD or CRT monitor. |
Interaxe height |
125mm |
4. |
Checking of each cylinder's injection timing with static. |
4. |
Four ways to adjust speed. Hand, digital,programmed 8-steps preset,slide. |
Volume of fuel tank |
60L |
5. |
Measurement of rack travel at any speed. |
5. |
You can set up test data of injection pump,and use it to control test bench. |
DC.supply |
12/24V |
6. |
Checking of the LDA. |
6. |
You can set up database of governor's curve. |
Feeding fuel pressure |
low:0-0.4MPA
high:0-4MPA |
7. |
Checking of the mechanical governor. |
7. |
You can compare the test curve with the standard curve of governor. |
Range of speed |
(+/-)0-4000RPM |
8. |
Checking of the pneumatic governor. |
8. |
You can get a report of a tested pump. |
Control fuel temperature |
40+/-2 |
9. |
Checking of the vacuum capacity of governor. |
9. |
Patent technology. |
Cylinders |
12cyl. |
10. |
Measurement of the internal pressure of distributor pump body. |
10. |
Two control system. Computer and instruments.You can select one of them. |
Output air |
-0.05-0.3MPA |
11. |
Measurement of the reflux delivery of distributor pump. |
11. |
With protect function for over and low voltage and short phase. |
|
|
12. |
Testing of the electro-magnetic valve of distributor pump. |
12. |
Save electric power. Direct drive AC motor. |
|
|
13. |
Checking of the transfer pump. |
13. |
High output torque,low fall of rotation speed.Adjusting speed quickly. |
|
|
14. |
Checking of the sealing of injection pump body. |
14. |
It can test both distributor ( VE )and in-line pumps. |
|
|